Page 13 - Jackson, WY Overlay Design Guidelines
P. 13

BUILDING HEIGHT/STORIES
                                             Design Intent:
                                             Buildings should convey heights that appear similar in scale to those
                                             seen traditionally. In Area 1: one & two-story are appropriate; in Area
                                             2: a building should be perceived as being predominantly two stories,
                                             especially at the street edge. Some limited portions of a building in these
                                             areas may also be taller as allowed by the LDR.

                                             Area 1: Design Guideline:
                                             1.11  Reflect the height of traditional buildings as perceived at the
                                                  street edge.
                                                  a.  Maintain a one and two-story façade height at the street level. See
            In Area 2, while building height
            maximums are set by the LDRs, a          design standards for exceptions.
            building should be perceived as being   b.  Floor-to-floor heights should appear similar to those of traditional
            predominantly two stories, especially    buildings along the block.
            at the street edge. Some portions of a
            building may be taller.
                                             Area 2: Design Guideline:
                                             1.12  Reflect the height of existing buildings as perceived at the street
                                                  edge.
                                                  a.  Maintain a mostly two-story façade height at the street level. See
                                                     design standards for exceptions.
                                                  b.  Floor-to-floor heights should appear similar to those of traditional
                                                     buildings within the overlay area.













            In Area 2, floor-to-floor heights should
            appear similar to those of traditional
            buildings within the overlay area.

























            14
   8   9   10   11   12   13   14   15   16   17   18